DeWALT® 2820 Nailin™ Nail Drive Anchor With Carbon Steel Nail, 1/4 in Dia, 1-1/2 in OAL, Mushroom Head Head, Zamak Alloy
Description
The Zamac Nailin is a nail drive anchor which has a body formed from Zamac alloy. Drive nails are available in carbon or stainless steel. The anchor can be used in concrete, block, brick or stone. A corrosion resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light duty, tamperproof applications. The anchor is not recommended for overhead, life-safety or sustained tensile loading applications unless special considerations are given to the allowable loads.
Invoice Description
NAILIN, ZAMAC, 1/4INx1-1/2IN, MUSHROOM HEAD, 100/BOX, SOLD BY BOX, POWERS NAILIN ANCHORS
Features
Back To Top- Installs in a variety of base materials
- Normal weight concrete, hollow concrete masonry, brick masonry and stone
- 655 lb at 4000 psi and 6000 psi for normal weight concrete shear strength
- 580 lb at 4000 psi and 6000 psi for normal weight concrete
Tech Specs
Back To TopBrand | DeWALT |
---|---|
Diameter | 1/4 in |
Drill Size | 1/4 in |
Finish | Zinc Plated |
Head Size | 35/65 x 9/64 |
Head Type | Mushroom Head |
Hole Diameter | 5/16 in |
In Stock | Y |
Material | Zamak Alloy |
Minimum Embedment Depth | 5/8 in |
Overall Length | 1-1/2 in |
Series | Nailin� |
Shear Strength | 440 lb at 2000 psi for Normal Weight Concrete |
Tensile Strength | 410 lb at 2000 psi for Normal Weight Concrete |