DeWALT® 7432SD1-PWR SD1 Expansion Wedge Anchor, 5/8 in Dia, 4-1/2 in OAL, 2-1/2 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Invoice Description
POWER-STUD+SD1, 5/8INx4-1/2IN W/EXPENSION CLIP, CARBON STEEL, 25/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
- Ultimate load capacity: 4960 lb tensile strength when embedded in 2500 psi, 5440 lb tensile strength when embedded in 3000 psi and 6285 lb tensile strength when embedded in 4000 psi compressive strength concrete
Tech Specs
Back To Top| Brand | DeWALT |
|---|---|
| Diameter | 5/8 in |
| Drill Size | 5/8 in |
| Finish | Zinc Plated |
| Head Type | Threaded Stud |
| In Stock | Y |
| Material | Carbon Steel |
| Maximum Work Thickness | 1-1/8 in |
| Minimum Embedment Depth | 2-3/4 in |
| Overall Length | 4-1/2 in |
| Series | SD1 |
| Shear Strength | 6815 lb |
| Tensile Strength | 6285 lb |
| Thread Length | 2-1/2 in |
| Thread Size | 5/8/2011 |
| Thread Type | UNC |
| Type | Expansion |