DeWALT® 7422SD1 SD1 Wedge Expansion Anchor, 1/2 in Dia, 3-3/4 in OAL, 2 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-StudĀ®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Invoice Description
POWER-STUD+SD1, 1/2INx3-3/4IN W/EXPENSION CLIP, CARBON STEEL, 50/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete
- Ultimate load capacity: 3800 lb tensile strength when embedded in 2500 psi, 4155 lb tensile strength when embedded in 3000 psi and 4800 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Suitable base materials include normal-weight concrete, structural sand-lightweight
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit diameter same as Anchor diameter
- Length ID code and identifying marking stamped on head of each Anchor
Tech Specs
Back To TopBrand | DeWALT |
---|---|
Diameter | 1/2 in |
Finish | Zinc Plated |
Head Type | Threaded Stud |
In Stock | Y |
Material | Carbon Steel |
Maximum Work Thickness | 1 in |
Minimum Embedment Depth | 2-1/4 in |
Overall Length | 3-3/4 in |
Series | SD1 |
Shear Strength | 4195 lb |
Tensile Strength | 4155 lb |
Thread Length | 2 in |
Thread Size | 1/2/2013 |
Thread Type | UNC |
Type | Expansion |