DeWALT Power-Stud+ SD1 7423SD1 Expansion Wedge Anchor, 1/2 in Dia, 4-1/2 in OAL, 2-3/4 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Invoice Description
POWER-STUD+SD1, 1/2INx4-1/2IN W/EXPENSION CLIP, CARBON STEEL, 50/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Tech Specs
Back To Top| Brand | DeWALT |
|---|---|
| Diameter | 1/2 in |
| Drill Size | 1/2 in |
| Finish | Zinc Plated |
| Head Type | Threaded Stud |
| In Stock | Y |
| Material | Carbon Steel |
| Maximum Work Thickness | 1-3/4 in |
| Minimum Embedment Depth | 2-1/4 in |
| Overall Length | 4-1/2 in |
| Series | SD1 |
| Shear Strength | 4195 lb |
| Tensile Strength | 4800 lb |
| Thread Length | 2-3/4 in |
| Thread Size | 1/2/2013 |
| Thread Type | UNC |
| Type | Expansion |