DeWALT® 7433SD1 SD1 Expansion Wedge Anchor, 5/8 in Dia, 5 in OAL, 3 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Invoice Description
POWER-STUD+SD1, 5/8INx5IN, W/EXPENSION CLIP, CARBON STEEL, 25/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 4960 lb tensile strength when embedded in 2500 psi, 5440 lb tensile strength when embedded in 3000 psi and 6285 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Tech Specs
Back To Top| Brand | DeWALT |
|---|---|
| Diameter | 5/8 in |
| Drill Size | 5/8 in |
| Finish | Zinc Plated |
| Head Type | Hex |
| In Stock | Y |
| Material | Carbon Steel |
| Maximum Work Thickness | 1-5/8 in |
| Minimum Embedment Depth | 2-3/4 in |
| Overall Length | 5 in |
| Series | SD1 |
| Shear Strength | 6815 lb |
| Tensile Strength | 5440 lb |
| Thread Length | 3 in |
| Thread Size | 5/8/2011 |
| Thread Type | UNC |
| Type | Expansion |