DeWALT® 7424SD1-PWR SD1 Expansion Wedge Anchor, 1/2 in Dia, 5-1/2 in OAL, 3-3/4 in L Thread, Carbon Steel, Zinc Plated
Description
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Invoice Description
POWER-STUD+SD1, 1/2INx5-1/2IN W/EXPENSION CLIP, CARBON STEEL, 100/BX, EACH, POWERS WEDGE EXPANSION ANCHOR
Features
Back To Top- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Nominal drill bit diameter same as Anchor diameter
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity - 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi, 3100 lb tensile strength when embedded in 4000 psi normal-weight concrete
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Tech Specs
Back To Top| Type | Expansion |
|---|---|
| Series | SD1 |
| Diameter | 1/2 in |
| Thread Type | UNC |
| Thread Size | 1/2/2013 |
| Thread Length | 3-3/4 in |
| Overall Length | 5-1/2 in |
| Drill Size | 1/2 in |
| Minimum Embedment Depth | 2-1/4 in |
| Shear Strength | 4195 lb |
| Tensile Strength | 4800 lb |
| Material | Carbon Steel |
| Brand | DeWALT |
| In Stock | Y |
| Finish | Zinc Plated |
| Head Type | Threaded Stud |
| Maximum Work Thickness | 2-3/4 in |